Descargar Imprimir esta página

Husqvarna 120 Manual De Usuario página 20

Ocultar thumbs Ver también para 120:

Publicidad

Daily maintenance
Do a check of the chain catcher. Re-
To do a check of the chain
fer to
catcher on page 21 .
Turn the guide bar, do a check of the
lubrication hole and clean the groove
in the guide bar. Refer to
check of the guide bar on page 24 .
Make sure that the guide bar and
saw chain are getting sufficient oil.
Do a check of the saw chain. Refer to
To examine the cutting equipment on
page 24 .
Sharpen the saw chain and do a
check of its tension. Refer to
sharpen the saw chain on page 23 .
Do a check of the chain drive sprock-
To do a check of the spur
et. Refer to
sprocket on page 24 .
Clean the air intake on the starter.
Make sure that nuts and screws are
tightened.
Do a check of the stop switch. Refer
to
To do a check of the start/stop
switch on page 21 .
Make sure that there are no fuel
leaks from the engine, tank or fuel
lines.
Make sure that the saw chain does
not rotate when the engine is at idle
speed.
Make sure that there is no damage
on the right hand guard.
Make sure that the muffler is correct-
ly attached, has no damages and
that no parts of the muffler are miss-
ing.
Clean or replace the air filter. Refer
To clean the air filter on page 22 .
to
Maintenance and checks of the safety
devices on the product
To do a check of the brake band
1. Use a brush to remove wood dust, resin and dirt
from the chain brake and clutch drum. Dirt and wear
can decrease the function of the brake. (Fig. 84)
20
Weekly maintenance
Clean or replace the spark arrestor
mesh on the muffler.
Clean the carburetor area.
To do a
Clean between the cylinder fins.
To
Monthly maintenance
Do a check of the fuel filter and the
fuel hose. Replace if necessary.
Do a check of all cables and connec-
tions.
Empty the fuel tank and clean the in-
side.
Empty the oil tank and clean the in-
side.
2. Do a check of the brake band. The brake band must
be at a minimum of 0.6 mm/0.024 in thick at its
thinnest point.
To do a check of the front hand guard and the
chain brake activation
1. Make sure that the front hand guard does not have
damages such as cracks.
930 - 007 - 06.03.2023

Publicidad

loading

Este manual también es adecuado para:

125