Publicidad
Idiomas disponibles
Idiomas disponibles
Instructions for use
WARNING: a slight odour may be present on first use. This disap-
pears after a few minutes. Provide sufficient ventilation.
Control panel
LED screen
Press the ON/OFF (0/I) button on the back of the appliance to switch
the appliance on and off (a beep will be heard and the screen will
light up for 2 seconds before switching off). The appliance is now in
standby mode.
Press this button again if you wish to stop the appliance.
From standby mode, press
to switch the appliance on.
When the heater is switched on for the first time, or if its power supply
is cut off for more than 72 hours, or if the
symbol flashes on the
display, the time and date must be set. This symbol will continue to
flash until these settings are made.
Setting the date and time:
The date and time can only be set when the appliance is switched on.
To do this, press
.
Press
for about 3 seconds, the day icon will flash ([M]= Monday,
[T]= Tuesday, [W]= Wednesday, [T]= Thursday, [F]= Friday, [S]= Sat-
urday, [S]= Sunday). Use + and - to set the day of the week.
Rev 0_04 05 23
Fabriqué en Chine
Page 38
Publicidad
