Publicidad
Idiomas disponibles
Idiomas disponibles
Manual mode:
Press
- the heater will start up in 2000 W mode (the $$ symbol will appear on
the display).
- Use + and - to set the desired temperature (from 5°C to 35°C). If noth-
ing is done for about 5 seconds, the desired temperature is automatically
stored. The display will return to showing the current room temperature
and time.
- Press
once and the heater will operate in 1000 W mode (the
symbol will appear on the display).
- Press
a second time and the heater will return to 2000 W mode.
- Press
and the heater stops.
Note:
1. When the device is in standby mode, the screen goes blank. No dis-
play is available.
2. In 2000W and 1000W mode, the set temperature must be higher than
the room temperature. Otherwise, the appliance will not start to heat up.
3. If the "frost protection" mode is selected, the temperature cannot be
changed.
4. Once the room temperature reaches the desired temperature, the ap-
pliance switches off automatically.
5. If the ambient temperature is about 2°C lower than the set tempera-
ture, the appliance will restart.
Towel dryer:
When the bars of the towel rail are unfolded, press the
button to start
the towel rail and the
icon will appear on the screen.
Press
again to switch off the towel dryer: the
icon disappears from
the display.
Rev 0_04 05 23
Fabriqué en Chine
Page 40
Publicidad
