Publicidad
Idiomas disponibles
Idiomas disponibles
Only 2 periods per day can be programmed.
5) The symbols [T] (TUESDAY) and
flash on the display. Re-
peat the above steps to programme each day of the week.
Note:
- Once the first period has been programmed, you can avoid pro-
gramming a second period by pressing
. In this case, all the re-
maining hours will be in Frost Protection mode.
- Once the first period has been programmed, you can avoid pro-
gramming , a second period by pressing
.
- If a day of the week is not programmed, all the hours of that day will
be either in Frost Protection mode or in Comfort mode, depending on
the factory setting.
- Programming can be interrupted at any time by pressing
. The
screen then returns to the current day's settings.
- In PROGRAM mode, during a heating period, it is entirely possible
to change the heating output and the desired temperature (For these
settings, see the corresponding paragraphs).
- During programming, if no button is pressed for more than 2 min-
utes, programming is automatically interrupted.
- The presence detector and the towel dryer function do not operate
when the appliance is in programming mode.
- Only the window opening sensor can be activated in programming
mode.
Automatic OFF function (timer)
In Comfort mode, press
, the
icon will flash (it will stop flashing
when programming is complete), which means you can now set the
automatic switch-off time.
1. Use + or - to select the desired time from 0 to 24 hours in 1 hour
steps.
Rev 0_04 05 23
Fabriqué en Chine
Page 44
Publicidad
