JENN-AIR Pro-Style Serie Guía De Uso Y Cuidado página 33

Tones (beeps)
The number of beeps heard at the end of cooking and at the
end of timer operation and their volume can be adjusted.
To adjust the beeps:
1. Press Setup pad.
2. Use the arrow to scroll.
3. Select TONES.
/ ..............
" Setup
, On / Off/
To change the beeps at the end of cooking:
1. Follow "Tones" steps 1-3 (see above:).
2. Select COOK TONE.
3. Use the arrow to scroll.
4. Select 1=30 MIN to hear one beep every thirty seconds.
OR
Select 1=60 MIN to hear one beep every sixty seconds.
OR
Select 1 BEEP to hear one beep only at the end of cooking.
5. Press the Setup pad to exit.
To change the timer beeps:
1. Follow "Tones" steps 1-3 (see above:).
2. Select TIMERS TONES.
3. Use the arrow to scroll.
4. Select 2-30 SEC to hear two beeps every thirty seconds.
OR
Select 2-60 SEC to hear two beeps every sixty seconds.
OR
Select 1 BEEP to hear one beep only at the end of the
set time. ,.............. ,
Setup
h
5. Press the Setup pad to exit. '
On/Off/
To change the volume of the beeps: ..........
1. Follow "Tones" steps 1-3 Cseeabove:).
2. Press the arrow to scroll.
3. Select VOLUME.
4. Select HIGH for the highest volume.
OR
Select MEDIUM for medium volume.
OR
Select LOW for the lowest volume.
5. Press the Setup pad to exit.
12 HR Shutoff
The oven will automatically turn off at the end of 12 hours if
you accidentally leave it on.
To turn off this feature:
/, ...........
1. Press Setup pad. /
Setup
\ On/Off /
2. Use the arrow to scroll. .......... "
3. Select 12HR SHUTOFF.
3. Select ON or OFF using the Quickset pads.
4. Press the Setup pad to exit.
Energy Saver
To save energy, the display can be set to go dark if it is not
being used.
To set the Energy Saver feature:
1. Press Setup pad.
2. Use the arrow to scroll.
3. Select ENERGY SAVER.
/ Setup
On/Off,
4. Select ON or OFF using the Quickset pads.
5. Press the Setup pad to exit.
Press any pad to "wake up" the display.
Service
This area of the oven control displays the Jenn-Air Customer
Service toll-free phone number.
1. Press Setup pad.
Setup
2. Use the arrow to scroll. , On / Off
...... /
3. Select SERVICE.
4. Press the Setup pad to exit.
DelTIC
When Demo is selected, you will see a short presentation
highlighting the features of your new Jenn-Air range.
/ .............
1. Press Setup pad. "
Setup
'
2. Use the arrow to scroll. On / Off/
3. Select DEMO. "..............
4. Select ON or OFF using the Quickset pads.
5. Press the Setup pad to exit.
32