Oven (Lower Oven)
CAUTION
•
Do not use Steam Proof when the oven temperature is above 125 °F. If
temperature is above 125 °F, this mode won't function properly. Wait until the
oven cools down.
•
Do not use Steam Proof for warming food. The proofing temperature is not hot
enough to keep food warm.
•
Place the dough in a heat-safe container on rack position 2 or 3 and cover it
with a cloth or with plastic wrap. You may need to anchor the plastic wrap
underneath the container so that the oven does not blow the plastic wrap off
the dough.
To avoid lowering the temperature and extending proofing time, do not open
•
the oven door.
NOTE
•
Preheating is not necessary on special function feature.
•
An error beep sounds if the temperature setting is out of the set range.
Rack position chart for special cooking options
Mode
Keep Warm
Steam Proof
Stone Bake Mode
Dehydrate
60 English
NQ70CG700DMT_AA-01_IB_NQ7000C_EN+MES+CFR.indb 60
NQ70CG700DMT_AA-01_IB_NQ7000C_EN+MES+CFR.indb 60
Rack position
2
2 or 3
1 or 2
3 or 4
Using the smart control feature (Lower oven only)
To use the oven's Smart Control, you must download the SmartThings app to a
mobile device. Functions that can be operated using the SmartThings app may not
work smoothly if communication conditions are poor or the oven is installed in a
place with a weak Wi-Fi signal.
Please refer to the following table for the main functions that can be operated
from the app.
When Smart Control on the
Monitoring (Oven, Probe), Oven off
oven is off
When Smart Control on the
Monitoring (Oven, Probe), Oven start, Oven off,
oven is on.
Error check
How to connect the oven
Download and open the SmartThings app on your smart device.
1.
2.
Follow the app's on-screen instructions to connect your oven.
3.
Once the process is complete, the connected
displays and the app will confirm you are connected.
4.
If the connection icon does not turn on, follow the instruction in the app to
reconnect.
icon located on your oven
2023-10-11 오전 10:35:17
2023-10-11 오전 10:35:17