Publicidad
Idiomas disponibles
Idiomas disponibles
Plug & Auto Setup
Your DVD-VCR will automatically set itself up
when it is plugged into the mains for the first time.
TV stations will be stored in memory. The
process takes a few minutes. Your DVD-VCR
will then be ready for use.
1
Connect the RF Cable as indicated on page
9. (Connecting Your DVD-VCR to the TV
using the RF Cable)
2
Plug the DVD-VCR into the mains.
• "AUTO" in the front panel display flickers.
3
The Language Set menu is displayed.
SETUP
Language
DVD
VCR
PROG
FUNC
OK
4
Press the œ or ƒ button to select the
desired language, then press OK button.
Start the auto setup.
SETUP
Auto Setup will be
DVD
started.
VCR
Check antenna and TV
cable connection.
PROG
FUNC
OK
5
Start the auto scanning.
The number of stations automatically stored
by the DVD-VCR depends on the number of
stations that it has found.
12 - English
English
√
Français
Deutsch
Español
Italiano
Nederlands
êÛÒÒÍËÈ
Return
Menu
Return
Menu
SETUP
Channel Memorizing
DVD
Please Wait ....
VCR
PROG
FUNC
OK
6
Check the date and time.
SETUP
Time
DVD
12 : 00
VCR
PROG
FUNC
OK
Refer to "Setting the Date and Time" to
change the date and time. (see page: 14)
Notes
• Now, you only have to switch the DVD-VCR
on and it is ready for use.
• Function for "Plug & Auto Set Up" is fixed
already. So if you want to change this fixed
one, you can change. (refer to "Presetting the
Stations Manually" page 15).
Return
Menu
Date
Year
01 / 01
2007 MON
Return
Menu
Publicidad
