Publicidad
Idiomas disponibles
Idiomas disponibles
NICAM
NICAM programmes are divided into 3 types.
NICAM Stereo, NICAM Mono and Bilingual (trans-
mission in another language).
NICAM programmes are always accompanied by a
standard mono sound broadcast and you can
select the desired sound. Please refer to page 28.
1
Press the MENU button, then press the OK or
‹ button.
SETUP
Language
Clock
DVD
Install
VCR
User Set
Auto Power Off
PROG
Screen Messages
FUNC
OK
2
Press the œ or ƒ button to select User Set,
then Press the OK or ‹ button.
The User Set menu is displayed.
SETUP
Colour System
NICAM
DVD
IPC
VCR
PROG
FUNC
OK
3
Press the œ or ƒ button to select NICAM, then
press the OK or ‹ button to select On or Off.
• On (for NICAM mode):
Normally set at this position
• Off (for MONO mode):
Only set at this position to record the standard
mono sound during a NICAM broadcast if the
stereo sound is distorted due to inferior
reception conditions.
‹ ‹
‹ ‹
‹ ‹
‹ ‹
: Off
: On
Return
Menu
: Auto
: On
: On
Return
Menu
Intelligent Picture Control
This feature allows you to adjust the sharpness
of the image automatically, according to your
own preferences.
1
During playback, press the MENU button,
then press the OK or ‹ button.
2
Press the œ or ƒ button to select User Set,
then press the OK or ‹ button.
The User Set menu is displayed.
3
Press the œ or ƒ button to select IPC
(Intelligent Picture Control), then press the OK
or ‹ button.
SETUP
Colour System
NICAM
DVD
IPC
VCR
PROG
FUNC
OK
• You can select the modes simply by press-
ing the IPC button.
4
To adjust the sharpness manually, press the
ƒ button to turn the IPC mode OFF.
The sharpness of the picture is adjusted
manually.
Press the ¦ or ‹ buttons until the picture is
displayed according to your preferences.
❉ ❉
PICTURE ❉ ❉
IPC : OFF
SOFTEN
: Auto
: On
: On
Return
Menu
SHARPEN
❉
ON/OFF : ƒ ƒ
English - 19
Publicidad
