Publicidad
Idiomas disponibles
Idiomas disponibles
Using the Tape Counter
The tape counter:
• Indicates the elapsed time in the play and
record modes (Hours, Minutes and Seconds).
• Is reset when a cassette is inserted in the
DVD-VCR.
• Allows you to find the beginning of a sequence
easily.
• If the remaining time is to be calculated
correctly, you must indicate the type of
cassette being used.
1
Insert a cassette in your DVD-VCR.
To set the tape counter to zero at the begin-
ning of a sequence:
• Press the INFO button twice to display the
counter.
• Press the CLEAR button when you want to
set the tape counter to zero.
2
When you are ready,
• Start Playback or Recording.
• Press the ■ button.
• To fast-froward or rewind to the sequence at
which the counter was set to zero, press the
¦¦ or ‹‹ button.
• Some DVD-VCR information, such as the
counter, can be displayed on the television
screen (Unless you have deactivated the
Screen Messages mode; refer to page 20).
Press the INFO button:
• Once to display the current function,
programme number, recording speed, time
and counter.
• Twice to display the counter only.
• Three times to display the time remaining on
the cassette.
• Four times to clear the display.
0:00:00
D
VD
F
unctions
D
VD
F
unctions
Setting Up the Language Features
If you set disc menu, audio and subtitle language in advance,
it will come up automatically every time you watch a movie.
Using the Disc Menu Language
1
Press the MENU button in the stop mode.
Press the œ or ƒ button to select DVD, then
press the OK or ‹¤button.
SETUP
Language Setup
Audio Setup
DVD
Display Setup
VCR
Parental Setup :
PROG
Divx (R) Registration
FUNC
OK
2
Press the OK or ‹¤button again.
Press the œ or ƒ¤button to select Disc
Menu, then press the OK or ‹ button.
SETUP
Disc Menu
DVD
Audio
Subtitle
VCR
DivX Subtitle
PROG
FUNC
OK
3
Press the œ or ƒ button to select the
required language, then press the OK or ‹
button.
Disc Menu
SETUP
Audio
DVD
Subtitle
VCR
DivX Subtitle
PROG
FUNC
OK
- If the selected language is not recorded on
the disc, the original pre-recorded language is
selected.
- The language is selected and the screen
returns to Language Setup menu.
- To make the setup menu disappear, press the
MENU button.
‹ ‹
‹ ‹
‹ ‹
‹ ‹
‹ ‹
Return
Menu
: English
: English
: Automatic
: Unicode
Return
Menu
▲
✓ English
Français
Deutsch
Español
Italiano
Nederlands
Cesky
▼
Return
Menu
English - 29
Publicidad
