Ecolab EcoPro Instrucciones De Servicio página 123

DANGER!
Hands must be washed before breaks and at the end of the working day.
Information about the usual precautions when handling chemicals and about
the use of PPE can be found on the relevant safety data sheet for the chemical
being used and must be complied with.
ENVIRONMENT!
Metering medium that leaks or spills may be harmful to the environment.
Leaks or spills of a metering medium must be cleaned up and disposed of
correctly in accordance with the instructions on the safety data sheet.
It is imperative to use the prescribed PPE.
Preventive action:
Place product containers in a tray to collect leaking fluids without harming the
environment.
Hazard arising from automatic start-up
DANGER!
Automatic start-up poses a hazard in areas marked with the symbol opposite.
An automatic start-up can be initiated as soon as the power supply is
connected with no need to press a switch/button beforehand.
CAUTION!
Danger of automatic start of the pump
If the autostart function is active, the pump operator is responsible for taking
suitable measures to ensure that an unwanted start-up of the pump is
prevented when the mains power is restored after a power cut.
Hazards caused by pressurised components
DANGER!
Danger of injury from pressurised components!
With improper handling, pressurised components can move uncontrollably and
cause severe injuries.
Liquid under high pressure can escape from pressurised components if
handled improperly or in the case of a defect. This can lead to severe or fatal
injuries.
– Take appropriate protective measures during operation, e.g. by using
splash protection covers.
– Establish a pressure-free state.
– Discharge any residual energy.
– Make sure that liquids cannot be discharged accidentally.
– Immediately call in qualified staff to replace defective components which
are pressurised during operation.
21
Safety
MAN046879 Rev. 12-12.2023