Publicidad
Idiomas disponibles
Idiomas disponibles
Preparing
the Food Processor for Use
Cut Hazard
Handle blades carefully.
Failure to do so can result in cuts.
4.
5.
Insert the desired accessory
into
the work bowl.
See page 9 for
accessory instructions.
Place the work bowl cover on the work
bowl with
the feed tube just to the left
of the work
bowl handle.
Grasp the
feed tube and turn the cover to the
right
until it locks into place.
Before
First
Use
Before using your Food Processor for the
first time, wash the work bowl, work
bowl cover, mini bowl, feed tube pusher,
discs, and blades either by hand or in
the dishwasher
(see "Cleaning the Food
Processor" on page 13).
Work Bowl Assembly
1. Place the Food Processor base on a
dry, level countertop
with
the controls
facing forward.
Do not plug in the
Food Processor
until it is completely
assembled.
2. With the handle just to the left of
center,
place the work bowl
on the
base, fitting
the center opening
over
the power
shaft.
3. Grasp the work bowl
handle
and turn
the bowl
to the right
until it locks
into position.
NOTE: To avoid damage
to the work bowl,
do not attach
the cover to the work bowl
before the work bowl is locked on the base.
6.
Fit the 2-piece food
pusher into the
feed tube.
NOTE: Your Food Processor will not
operate
unless the work
bowl and
work bowl
cover are properly
locked
on the base.
To avoid damage
to the work
bowl, do
not remove the work bowl from the base
without
first removing
the work bowl cover.
Publicidad
