Publicidad
Idiomas disponibles
Idiomas disponibles
Programming
HomeLink
®
In the rare case the HomeLink system does not program with the Security+ 2.0
Garage door opener, install a repeater kit. Refer to HomeLink instructions below.
HomeLink is the in-vehicle system. The image used is for reference only and your
product may look different.
WHEN TO INSTALL A HOMELINK REPEATER KIT
All 2006 and Older vehicles – A repeater kit is required and must be purchased by
the homeowner.
All 2007 and Newer vehicles – Program the HomeLink according to the vehicle
instructions. If after ONE attempt to program the HomeLink to the garage door
opener and you are unsuccessful, install a repeater.
HOW TO ORDER
Order the HomeLink repeater kit from an installer or call 1-800-355-3515. To
program the HomeLink repeater kit, refer to the instructions provided in the kit or
visit: http://www.homelink.com/program.
ADJUSTMENT QUICK FACTS
•
Only one repeater kit is required per home.
•
Use different HomeLink buttons in vehicle if programming multiple cars, button 1
first car, button 2 second car... etc.
•
HomeLink remote is NOT a garage door opener.
•
If you are using the HomeLink repeater with a garage door opener that has a
battery backup system, ensure your original garage door opener remote control is
programmed to the garage door opener and place it in your glove box for use in the
event of a power outage.
•
The remote included in this repeater kit MUST be kept for future programming (new
vehicle, new garage door opener etc).
18
HomeLink
I
II
III
Repeater Kit
Publicidad
