Publicidad
Idiomas disponibles
Idiomas disponibles
.
.
.
Keep the ice maker connected
to the water supply.
Pour 8 oz. of Nickel-Safe
Ice
Maker Cleaner Solution into the water trough.
After about 5 minutes, initiate the
wash cycle at the ICE/OFF/WASH
switch by switching it to the WASH position.
The machine will run the Automatic
Clean mode.
Allow 30 minutes for proper cleaning. After cleaning, turn the machine OFF at the
ICE/OFF/WASH
selector switch.
Drain offthe waste water to a container
by means
of the drain pipe at the front of the water trough.
NOTE: Don't drain offthe
waste water to the inside of the cabinet.
Repeat steps 3 and 4 (without Ice Maker Cleaning Solution)
to rinse the ice making
system 3 times.
NOTE." The use of the lee Maker Cleaner Solution in the water trough during the
rinse is not needed.
The ice machine cleaner contains acids.
DO NOT use or mix with any other solvent-based
cleaner products.
Use rubber
gloves
to protect
hands.
Carefully
read the material
safety
instructions
on the container
of the ice machine cleaner.
DISCARD
the first batch of ice produced
after cleaning.
6. Prepare a sanitizing solution made of 1 ounce of household bleach and 2 gallons of
hot water (95 ° to 115° F). Wipe the entire bin inside and out, covering every wall
surface.
7. Fill a spray bottle with the sanitizing solution and spray all corners and edges, making
sure to cover all surfaces with the solution.
8. Allow the solution to be in contact for at least 3 minutes, then dry.
9. Repeat step 5 to rinse the ice making system one more time.
10. Put the ICE/OFF/WASH
switch in the ICE position.
The machine will return to the
regular ice making mode. Discard the first batch of ice.
21
Publicidad
