IMPORTANT
SAFEGUARDS
Before the ice maker is used, it must be properly positioned
and installed
as described
in this manual,
so read
the manual
carefully.
Franklin
Industries
strongly recolranends
that you have a professional
install your
new machine.
The warranty
may be affected
or voided
by an incorrect
installation.
To reduce the risk of fire, electrical
shock or injury when
using the ice maker, follow basic precautions,
including the following:
•
Plug into a grounded
3-prong outlet; do not remove grounding prong, do not use an
adapter, and do not use an extension cord.
•
It is recolranended
that a separate circuit, serving only your ice maker, be provided.
Use receptacles
that cannot be turned offby a switch or pull chain.
•
Do not connect or disconnect
the electric plug when your hands are wet.
•
Never unplug the ice maker by pulling on the power cord. Always grip the plug
firmly and pull straight out from the outlet.
•
Never clean ice maker parts with flammable fluids. Do not store or use gasoline or
other flammable vapors and liquids in the vicinity of this or any other appliance.
The
fumes can create a fire hazard or explosion.
•
Before proceeding
with cleaning and maintenance
operations,
make sure the power
line of the unit is disconnected
and the water line is shut off. (EXCEPTION:
When
cleaning the machine's
ice making and water systems, see pages 20 - 21)
•
Before operating,
put all panels back into place.
•
Never allow children to operate, play with or crawl inside the ice maker.
•
Do not touch the evaporator
with your hand when the machine is operating.
•
Unplug the ice maker or disconnect power before cleaning or servicing.
Failure to do
so can result in electrical shock or death.
•
Do not attempt to repair or replace any part of your ice maker unless it is specifically
recommended
in this manual. All other servicing should be referred to a qualified
technician.
•
Use two or more people to move and install ice maker. Failure to do so can result in
back or other injury.
•
To ensure proper ventilation for your ice maker, the front of the unit must be
completely
unobstructed.
Choose a well-ventilated
area with temperatures
above
3