Signature Kitchen Suite SKSUD2402P Manual De Instalación página 14

en-us_main.book.book Page 14 Friday, July 14, 2023 11:13 AM
14 INSTALLATION
CAUTION
• After the appliance is rolled into position, verify that the anti-tip brackets are properly engaged.
1
2
1
Remove the base panel.
2
Retract the leveling legs so the appliance can be wheeled forward.
3
Plug the power cord into the outlet.
4
Tie a long string around the middle of the power cord. Feed the string over the top of the appliance,
pull it until the power cord is held high off the ground, then tape the string to the front of the
appliance to hold the power cord off the ground. Do not pinch or strain the power cord. Make sure it
is still plugged in.
5
Carefully move the appliance into the enclosure, making sure not to pinch thepower cord or water line
under or behind the appliance.
6
Remove the string from the power cord and the edge protection on the enclosure.
4
3
5
4