Signature Kitchen Suite SKSUD2402P Manual De Instalación página 20

en-us_main.book.book Page 20 Friday, July 14, 2023 11:13 AM
20 INSTALLATION
Panels and Trim
Installing Door Panels
The door panel should be installed first, followed by the upper then lower drawer panels, if needed.
1
Place the door panel face down on a protected surface.
2
Locate the correct side of the door panel template for your product and position the template flush
with the top and left sides of the panel.
3
Use the template to mark the correct screw locations on the back of the panel.
4
Slide the template to the right so it is flush with the top and right sides of the panel.
5
Use the template to mark the correct screw locations on the back of the panel.
6
On refrigerator/freezer columns, begin inserting a #8 x 1/2" screw into the fifth hole from the top on
each side. On wine columns, use the third hole from the top. Stop when the screws are 3/16" (4 mm)
proud of the panel. These will be the support screws during the panel installation.