Signature Kitchen Suite SKSUD2402P Manual De Instalación página 8

en-us_main.book.book Page 8 Friday, July 14, 2023 11:13 AM
8 INSTALLATION
Top View (Door Open 115°)
Case
Hinge
Door
- Dimensions and Clearances
A
B 23 7/16" (595 mm)
Handle Side 1/8" (2.5 mm) min.
C
Hinge Side 1/2" (12.5 mm) min.
D
E 23 11/16" (602 mm) with panel
F
NOTE
• Door Swing Clearances
- The installation must allow for clearances to
adjacent walls or cabinets. This wine
refrigerator is equipped with a 2-position door
stop. The factory-set 115° door swing can be
adjusted to 90° if clearance to adjacent
cabinets or walls is restricted.
• Door Handle Clearances
- The door handle depth must be added to the
dimension as noted to determine the total
clearances required from adjacent cabinets or
walls. This clearance will vary depending on
the custom handle used. When using the
Stainless Steel Door Panel Kit w/ Stainless Steel
Handle, the door handle clearance with door
open 115° is 11 3/4" (298 mm).
Required Accessories and
Tools
Accessories
Supplied Accessories
• Installation instructions
• Operating instructions
• Installation kit
F
2 24" (610 mm)
3/16" (4 mm)
1/4" (6.5 mm)
Screw Size No.
5H x
6
45L
4D x
10
14L
4D x
4
6L
4D x
12
12L
NOTE
• In addition to the quantity required for installing
the appliance, spare screws may be provided.
Other
• Dolly, hand truck
• Drill for drilling holes in wall or floor.
• Drill bits in various sizes and suitable for
materials
• Wood screws in different sizes
• Thin plywood sheet, particle board or cardboard
to protect the floor from damage
• Suitable material for covering and protecting
furniture (e.g. protective sheets)
• Adhesive tape
Tools
Cordless screwdriver
Torx bit T20, T30 and
magnetic holder
Torx screwdriver T20, T30
3/8" (10 mm) hex nut driver
Various drill bits
Used for
Anti-tip bracket
Anti-tip bracket (6)
Enclosure (4)
Enclosure
Door panel