en-us_main.book.book Page 16 Friday, July 14, 2023 11:13 AM
16 INSTALLATION
4
Use a smartphone leveling app or place a carpenter's level on the top and sides of the appliance to
check that it is level and plumb. Or use the provided gauge tool to measure the distance of the
bottom edge of the appliance from the floor at the front corners.
WARNING
• To reduce the possibility of the unit tipping forward, the front leveling legs must be in contact with the
floor.
CAUTION
• If using a power drill, use the lowest torque setting.
• Leave at least 3/8 inch (10 mm) between the top front of the appliance and the top of the enclosure to fit
the top filler strip.
• Do not exceed 20 inch-pounds (2.25 Nm) of torque.
• 20 revolutions equal 1/16" (2 mm) of height adjustment.