Publicidad
Idiomas disponibles
Idiomas disponibles
Problem
• Burner cap is dull or
1. Scratching
has changed color
2. Use of detergent or abrasive cleansers
• Oven or racks are
Aluminum foil has melted in the oven
stained after using
aluminum foil
• Surface is not level
1. Range not leveled
• Oven is tipping
2. Anti-tip device not installed correctly
Approximately
0.65"
(16.5 mm)
• Flames too big on
The installer missed part of the conversion.
converted cooktop
(Check 2 parts: regulator, cooktop valve).
(NP LP)
Cause
15 k Burner Cap
Shine is lost
Shine is lost
23 k Burner Cap
Shine is lost
Shine is lost
Anti-tip bracket
Screw must
Level both sides of range
enter wood or
concrete
Use carpenter's level to
check level.
2
1
regulator
cooktop valve
WARRANTY
Prevention
• Do not use steel wool or
abrasive cleansers to clean.
• To remove burnt-on food,
soak the burner heads in hot
water for 20–30 minutes. (Do
not use detergent)
• Never cover the oven bottom
or cover an entire rack with
materials such as aluminum
foil.
• If the foil has already melted
onto the oven, it will not
affect the performance of the
oven.
• Check with installer first
Wall plate
• Check with installer first
• Refer to installation manual
75
Publicidad
