Publicidad
Idiomas disponibles
Idiomas disponibles
Care and cleaning of the
cooktop.
Be sure electrical power is off and all surfaces are cool before cleaning any part of the cooktop.
How to Remove Protective Shipping Film and Packaging Tape
Carefully grasp a corner of the protective
shipping film with gour fingers and slowlg
peel it from the appliance surface. Do not
use ang sharp items to remove the film.
Removeall of the film before using the
appliance for the first time.
To assure no damage is done to the finish
of the product, the safest wag to remove
the adhesive from packaging tape on new
appliances is an application of a household
liquid dishwashing detergent. Applg with a
soft cloth and allow to soak.
NOTE:Theadhesive must be removed
from all parts. It cannot be removed if it is
baked on.
Vent Grille
Before cleaning the vent grille, be sure
the exhaust blower is turned off.
To clean the vent grille, remove it from
the cooktop by lifting it up and off.
Wipe with a damp clotH. If necessarg,
the vent grille can be washed in the sink.
Use dishwashing liquid for cleaning.
Do not use abrasive cleaners. Theg will
damage the vent grille'sfinish.
Do not clean the vent grille in the
dishwasher.
Vent Filter and Chamber
The filter is held in place at an angle with
a hold bump. Lift the filter up and out of
filter in place.
the vent opening diagonallg.
To clean the filter, swish it in hot, soapg
water. Rinse well and drg thoroughlg.
Do not operate
the vent without
the
Do not operate the vent without the
filter in place.
Vent Chamber
Removeand replacethe filter diagonallythroughthe vent
opening.
To order filters please call our toll-free number:
National
Parts Center. ..........800.626.2002
Filter. ......................................... # WBO2X10651
When replacingthe filter, makesure it rests, at an angle,
on the supportsin the vent opening.
To clean the vent chamber, use hot,
soapg water. Rinsewith clean water and
drg thoroughlg. Do not use abrasive
cleaners;theg will damage the finish.
Replacethe filter after it is cleaned and drg.
ShaPed area
Control Knobs
The control knobs mag be removed for
easier cleaning.
Make sure the knobs are in the OFF
positions and pull them straight off the
stems for cleaning.
To clean the knobs, place them in a
dishwasher or wash with soap and water.
Rinsewith clean water. Hake sure the
insidesof knobs are drg before replacing.
Replace the knobs in the OFF position
to ensure proper placement.
10
Stainless Steel Surfaces (onsomemodels)
Do not use a steel wool pad; it will
scratch the surface.
To clean the stainless steel surface,
use warm sudsg water or a stainless steel
cleaner or polish. Alwags wipe the surface
in the direction of the grain. Follow the
cleaner instructions for cleaning the
stainless steel surface.
To inquire about purchasing stainless steel
appliance cleaner or polish, or to find the
location of a dealer nearest gou, please call
our toll-free number:
National Parts Center
1.800.626.2002
ge.com
Publicidad
