Descargar Imprimir esta página

GE PP989 Manual De Instrucciones página 26

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation
Instructions
ELECTRICALCONNECTIONS
[]
MAKING ELECTRICAL CONNECTIONS
Effective January
1, 1996, the National
Electrical Code requires that new, but not
existing, construction
utilize a four-conductor
connection
to an electric range. When installing
an electric range in new construction,
follow the
instructions
in NEW CONSTRUCTION AND FOUR-
CONDUCTOR BRANCH CIRCUIT CONNECTION.
You must use a three-wire,
single-phase
AC 208Y/120 Volt or 2/40/120 Volt, 60 Hertz
electrical
system with separate ground.
If you connect
to aluminum
wiring, properly
installed connectors
approved
for use with
aluminum
wiring must be used.
New construction
and four-conductor
branch
circuit
connection
• When installing
in new construction,
or
• When installing
in a mobile home, or
• When local codes do not permit grounding
through
neutral:
4-Conductor
Branch Circuit
When connecting
the cooktop
to a 4-conductor
circuit, connect the red leads of the cooktop and
the power supply to the branch circuit red lead;
connect the black leads to each other. Connect
the cooktop white lead to the power supply and
branch circuit neutral leads, which are white or
gray. Ground the unit by connecting
the green
conductor
of the cooktop to the bare or green
leads of the power supply and branch circuit
(ground leads).
4-Conductor BranchCircuit
BranchCircuit
Power
Cooktop
Supply
Power
Leads
Leads
Red
Red
Red
1_
White or
_
NEUTRAL
Gray
_
White
120V IAC
Black
-
Black
Black
Bareor
Bareor
Green
GND
_
Green
MAKING ELECTRICAL CONNECTIONS
(cont.)
Three-conductor
brunch circuit connection
• When installing in existing construction
built
prior to January
1, 1996, and if permitted
by
local codes:
3-Conductor
Branch Circuit
When connecting
cooktop
to a 3-conductor
circuit, connect the red leads of the cooktop
and
the power supply to the branch circuit red lead;
connect the black leads to each other. Connect
the green and white leads of the cooktop to the
power supply and branch circuit neutral leads,
which are white or gray.
3-Conductor BranchCircuit
Branch Circuit
Power
Cooktop
Supply
Power
Leads
Leads
Red
Red
Red
1_C
White or _
Whiteor
0
NEUTRAL
Gray
_
Gray
_
_Vrhei:_
120V_AC
Black
_
Black
_-
Black
26

Publicidad

loading