Imperia Restaurant RBT Manual De Instrucciones página 8

1456 restaurant elettronica con garanzia-08-2020.qxp_1455 rest elettronica multil 22/09/20 15:40 Pagina 8
Before operating the machine, check that the power supply to your premises corresponds to the
technical description in this booklet. It is not possible to use any other electrical supply. Earthing
of the appliance is compulsory by law.
The manufacturer declines all responsibility for injury to persons or damage to objects deriving
from non-observance of these requirements. Where necessary fit an adapter to the plug, checking
that it is suitable for the electrical cable.
THIS MACHINE IS NOT A TOY. WHEN IN USE THE MACHINE SHOULD BE SUPERVISED AND
OUT OF REACH OF CHILDREN.
Do not use the machine while wearing loose clothing, aprons or overalls which may be caught in
the rotating rolls of the pasta machine or in the rolling and cutting accessories.
Take particular care, apart from hygienic reasons, to ensure that hair is tied back (it is advisable to
wear a protective cap) and that other items such as necklaces and bracelets do not dangle near
the moving parts.
Place the machine on a flat, stable surface, which can bear the weight of the machine.
Before starting to use the machine ensure that you know how to stop it in an emergency.
Do not use the machine if:
- it is not operating correctly
- it has been damaged or dropped
- the electrical cable or the plug are damaged.
Do not immerse the electrical cable or the plug in water. Keep them away from hot surfaces.
Do not leave the electrical cable dangling from the edge of work surfaces or tables.
Do not use this machine near sinks or on wet surfaces.
DESCRIPTION OF THE MACHINE
The component parts of the machine are:
1 -Electronic pasta machine
2 - Pasta running surface
3 - Handle
The machine is fitted with a mechanical safety device consisting of two fixed supports which sup-
port n. 5 rods that, by rotating, facilitate the entry of the pasta, guaranteed the safety of the user.
For further safety in the use of the machine, the whole electrical circuit and controls are powered
at 24V dc through the internal current transformer.
IN AN EMERGENCY.
To stop the machine turn the master switch to position "0".
ATTENTION! NEVER TAMPER WITH THE SAFETY DEVICES DO NOT NEUTRALISE OR ALTER
THE PROTECTIVE SYSTEMS.
If you note machine malfunctions, switch it off immediately moving the switch to position
"0", take the power lead plug out of the socket and get in touch with your Authorised Dealer
(see warranty details below).
ELECTRICAL CONNECTIONS
WARNINGS
SAFETY DEVICES
8
(fig.1)
Accessories:
4 - "Simplex roll and cut equipment"