Publicidad
Figure 1: Typical Control Panel
Control Panel for E-P Plus
.
Display or Action
®
and E-P Express
Explanation
When the display says Run Formula, press this button to start the
\
formula.
During normal operation, the Run/Program keyswitch must be
B/P
set to
. This is the automatic position.
B
Use the Scroll Up and Scroll Down buttons to select the desired
v/w
formula.
The Next button is not used during normal operation.
y
The Signal Cancel button silences the operator signal that
x
sounds when a formula completes normally. Also, if an operator
signal is programmed with a chemical injection, add the
chemical and press this button to resume operation.
The Manual button is not used during normal operation.
`
The Terminate button cancels all remaining steps in the current
z
formula and starts the shutdown procedure for the machine. The
formula can not be resumed.
The Unlock Door button allows you to open the door if all other
'
safety conditions are met.
— End of BICJHF01 —
7
Chapter 1. Description of Controls
®
Models
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
PELLERIN MILNOR CORPORATION
Legend
Start button
Run/Program keyswitch
Run Indicator light
Scroll Down button
Display
Scroll Up button
Next button
Signal Cancel button
Operator Signal light
Manual Mode button
Terminate button
Unlock Door button
Publicidad
Capítulos
