Publicidad
Idiomas disponibles
Idiomas disponibles
Keypad Locks
Keypad Locks
»
Models FE575— Auto Lock and FE595— Flex Lock
WHAT IS THE
DIFFERENCE
BETWEEN THE AUTO
LOCK AND THE FLEX
Locking and Unlocking
LOCK?
The Auto
Lock (FE575)
Keypad locks are always locked from the outside, by default. Only the FE595 can be set to unlocked
is always
locked from
the outside.
The Flex Lock
(FE595) is
normally
locked from
the outside,
but can be set
to unlocked
by putting the
thumbturn in
the vertical
position.
Key Override
Key Override can be used when the battery is completely dead, or when no valid User Code is known.
*
Changing the Battery
»
FE595
7 • Enter brand in text variables • Enter document title in text variables
To Temporarily Unlock
»
If lighting is low, press the Schlage button to
illuminate the keypad before beginning.
1
Enter a User
2
Code into the
keypad.
1
Insert key.
Rotate the key back to starting position to relock. The key cannot be removed from the cylinder while the lock is
unlocked. See Changing the Battery on page 7 or Restore Factory Settings on page 13 for more information.
Replace the batteries in your lock at the same time each year that you test and replace the
batteries in your smoke alarms. This will ensure continued reliable operation. Use a high-quality
alkaline 9 volt battery for replacement.
1
Remove the
inside cover.
To Set to Unlocked (FE595 Only)
Rotate the lever to
open the door. Door
will automatically
re-lock.
*
2
3
Rotate key
270° to unlock.
2
Replace the
3
battery.
Locking and Unlocking
1
Rotate
2
the inside
thumbturn to
the vertical
position.*
No User Code is required to open the door when the
lock is set to unlocked.
Rotate knob/lever
to open door.*
Replace the
cover.
Rotate the
thumbturn back
to the horizontal
position to re-lock.
Publicidad
