Allegion SCHLAGE BE365 Guia Del Usuario página 9

Programming Guide
Programming Guide
Schlage Button Signals
The color of the Schlage button indicates the status of the lock.
Orange
• the lock is in programming mode
Green
• a correct user code was entered
• the programming process is complete
Codes
Control of the lock is simply managed via a six-digit Programming Code and four-digit User Codes.
PROGRAMMING CODE
(Six Numbers)
• The lock comes preset with one unique default
Programming Code. It can be found on the stickers, one
on the back of the keypad assembly and one on the
front of this User Guide.
• Used to put the lock in programming mode.
• DOES NOT unlock the lock.
• The first four numbers must be different from all of the
User Codes currently in the lock.
• If you forget the Programming Code, you can reset
the lock to factory settings, which restores the default
Programming Code. See Restore Factory Settings on
page 13.
Default Code Locations
The Default User Codes and Programming Code are located in two places:
Back of the Keypad
»
You must remove the Keypad from the door to see this
sticker.
9 • Enter brand in text variables • Enter document title in text variables
Programming Code XXXXXX
User Code A XXXX
S/N x-xxxxxxxx
User Code B XXXX
Model XXXXX

Programming Code XXXXXX
Place Label Here
User Code A XXXX S/N x-xxxxxxxx
Poner la etiqueta aquí
User Code B XXXX Model XXXXX
Placer l'autocollant ici

Default Codes
Códigos de predeterminado
Keypad Codes du défaut
Locks
User Guide
BE365 FE575/FE595
PLEASE KEEP THIS GUIDE CONSERVE ESTA GUÍA VEUILLEZ CONSERVERCE GUIDE
You will need these codes to operate ¡Necesitará estos códigos para operar Vous aurez besoin de ces codes pour
your lock! la cerradura! faire fonctionner la serrure!
Red
• an incorrect user code was entered
• there was an error in programming
• low batteries
• red blinking indicates critically low battery
USER CODES
(Four Numbers)
• The lock comes preset with two unique default User
Codes. They may be found on the stickers, one on the
back of the keypad assembly and one on the front of
this User Guide.
• Used to unlock the lock.
• These four numbers must be different from the first four
numbers of the Programming Code.
• Up to 19 possible User Codes can be stored in the lock at
one time.
Front of this User Guide
Codes