Publicidad
Idiomas disponibles
Idiomas disponibles
Routine Maintenance
EN
Parts
To keep the robot in good condition, it is recommended to refer to the accessory usage in the app or the following table for routine maintenance.
Replacement
Part
Maintenance Frequency
Period
Used water tank
After each use
/
Clean water tank
Main brush
Every 6 to 12 months
Once every 2 weeks
Side brush
Every 3 to 6 months
Mop pad holder
/
Dust box's filter
Every 3 to 6 months
Washboard
Base station's
signaling area
Base station's
charging contacts
Base station's auto-
empty vents
Once every month
/
Laser Distance Sensor
(LDS)
Robot's charging
contacts
Robot's auto-empty
vent
Robot's automatic
water refilling inlet
Note: The replacement frequency will depend on your usage of the robot. If an
exception occurs due to special circumstances, the parts should be replaced.
18
Maintenance
Replacement
Part
Frequency
Period
Line laser sensor
AI visual sensor
LED fill lights
Edge sensor
Bumper
Once every month
Omnidirectional wheel
Carpet sensor
/
Cliff sensors
Bottom of the robot
Recommended
to clean after
Cleaning solution adding
removing the
inlet
cleaning solution
(bottle)
Dust box
Clean it as needed
Dust bag
6-8 weeks
/
Every 1 to 3
Mop pad
months
Routine Maintenance
Washboard
1. Press the button
to make the robot exit the base station.
2. Remove the washboard and rinse it with clean water.
3. Press and hold the button
for 3 seconds to add water to the bottom
of the base station. Then use the included cleaning tool to clean it.
3s
4. Press and hold the button
for 3 seconds to pump out the used
water in the bottom of the base station, dry it with a soft and dry cloth,
and then put the washboard back.
3s
EN
19
Publicidad
