SFA Sanipump VX 65 Serie Manual De Funcionamiento página 107

106 of 449
7 Servicing/Maintenance
Table 19: Lubricant level
Motor version Efficiency class
024 F
040 F
049 F
073 F
7.2.2.2 Lubricating the rolling element bearings
The pump set is equipped with grease-lubricated, maintenance-free rolling element
bearings.
7.3 Drainage/cleaning
WARNING
Fluids handled, consumables and supplies which are hot and/or pose a health
hazard
Hazard to persons and the environment!
▷ Collect and properly dispose of flushing fluid and any fluid residues.
▷ Wear safety clothing and a protective mask if required.
▷ Observe all legal regulations on the disposal of fluids posing a health hazard.
1. Always flush the pump if it has been used for handling noxious, explosive, hot
or other hazardous fluids.
2. Always flush and clean the pump before transporting it to the workshop.
Provide a certificate of decontamination for the pump set.
7.4 Dismantling the pump set
7.4.1 General information/Safety regulations
WARNING
Unqualified personnel performing work on the pump (set)
Risk of injury!
▷ Always have repair work and maintenance work performed by specially trained,
qualified personnel.
WARNING
Hot surface
Risk of injury!
▷ Allow the pump set to cool down to ambient temperature.
WARNING
Improper lifting/moving of heavy assemblies or components
Personal injury and damage to property!
▷ Use suitable transport devices, lifting equipment and lifting tackle to move
heavy assemblies or components.
Observe the safety instructions and information.
For dismantling and reassembly observe the general assembly drawing.
Sanipump VX 65/80
Number of poles
2
4
2
2
M
[mm]
43
46
46
46