SFA Sanipump VX 65 Serie Manual De Funcionamiento página 69

Table 1: Variants covered by this operating manual
Type series Impeller type
Sanipump
Sanipump
Sanipump
Sanipump
Sanipump
Sanipump
Sanipump
9 If agreed to be included in the scope of supply
68 of 449
1 General
1 General
1.1 Principles
This operating manual is valid for the type series and variants indicated on the front
cover (for details, refer to the table below)
Nominal dis-
charge nozzle dia-
meter
[mm]
VX 65
VX 65
VX 65
VX 65
VX 80
VX 80
VX 80
The operating manual describes the proper and safe use of this equipment in all
phases of operation.
The name plate indicates the type series and size, the main operating data, the order
number and the order item number. The order number and order item number
clearly identify the pump set and serve as identification for all further business
processes.
In the event of damage, immediately contact your nearest SFA service facility to
maintain the right to claim under warranty.
1.2 Installation of partly completed machinery
To install partly completed machinery supplied by SFA refer to the sub-sections under
Servicing/Maintenance.
1.3 Target group
This operating manual is aimed at the target group of trained and qualified specialist
technical personnel. (ð Section 2.3, Page 71)
1.4 Other applicable documents
Table 2: Overview of other applicable documents
Document
Data sheet
General arrangement drawing/
outline drawing
Hydraulic characteristic curve
General assembly drawing
9)
Spare parts lists
Supplementary operating manu-
9)
als
For accessories and/or integrated machinery components observe the relevant
manufacturer's product literature.
Sanipump VX 65/80
Size of hydraulic Nominal impeller
system
170
170
170
170
220
220
220
Contents
Description of the technical data of the pump (set)
Description of mating and installation dimensions
for the pump (set), weights
Characteristic curves showing head, flow rate, effi-
ciency and power input
9)
Sectional drawing of the pump
Description of spare parts
e.g. for installation parts for stationary wet install-
ation
Motor rating
diameter
[mm] P [kW]
N
120 24
140 24
160 40
190 73
160 40
170 49
190 73