Publicidad
Idiomas disponibles
Idiomas disponibles
5 Installation at Site
Fig. 2: Lubricant level
M
Optimum lubricant level
2. Unscrew and remove screw plug 903.03 with joint ring 411.03.
ð The lubricant level must be 38 mm below the filler opening.
3. If the lubricant level is lower, top up the lubricant reservoir through the filler
opening until the indicated level M is reached.
4. Screw in screw plug 903.03 with joint ring 411.03. Observe the tightening
torques.
5.2.3 Checking the direction of rotation
WARNING
Hands and/or foreign objects in the pump casing
Risk of injuries, damage to the pump!
▷ Never insert your hands or any other objects into the pump.
▷ Before connecting the pump set, check that the inside of the pump is free from
any foreign objects.
▷ Never hold the pump set in your hands while checking the direction of rotation.
Sanipump VX 65/80-EN
83 of 449
Publicidad
