cecotec BOLERO DRESSCODE 120700 A Manual De Instrucciones página 109

- Connections are fixed.
- Do not allow children near or inside the washer.
- Please note that during wash cycles, the door surface temperature may increase.
- Strictly supervise children if they use or are near the appliance.
Error code list
Error on the display
F01
F03
F13
F14
F24
Another error F04-F98
Unb
F01 appears on the display
The machine does not have enough water. Make sure of the following:
- The tap is fully open and has sufficient water pressure.
- The water inlet pipe is connected.
- The filter net of the water inlet pipe is blocked (see "Cleaning and maintenance").
- The water pipe is frozen.
- Press the Start/Pause button after fixing the error.
- If the error still appears, contact the Cecotec Customer Service.
F03 appears on the display
The washing machine is not drained. Stop the programme. Turn off the washing machine and
disconnect it from the power supply. Make sure of the following:
- The draining pipe is connected.
- The draining pump filter is not blocked.
IMPORTANT: make sure the device has completely cooled down before draining it.
If the drain hose is frozen:
- Plug the device again into a power supply.
Error description
Water inlet fault
Drain failure
Door lock fault
Door unlock fault
Overflow or too much foam.
PCB electronic module failure
Unbalance warning
BOLERO DRESSCODE 120700A
ENGLISH
109