cecotec BOLERO DRESSCODE 120700 A Manual De Instrucciones página 110

ENGLISH
- Select and start the Spin programme (Spin speed) or press and hold the Start/Pause
button for 3 seconds and restart the desired programme.
- If the error still appears, contact the Cecotec Customer Service.
Error codes
The washing machine stops when the programme is running. The display shows the fault
code F13, F14, F24, F04 to F98 or Unb.
F13 appears on the display
- The door lock does not work properly. Start the programme for 20 s and unlock the door
of the washing machine (PTC) to check if the door is closed.
- Open it and close it again.
- Press the Start/Pause button after fixing the error. If the error occurs again, disconnect
the appliance from the mains and contact the Cecotec Customer Service.
F14 appears on the display
- Door opening error
- Solution: press the Start/Pause button. The washing machine will try to open the door.
- The error will not disappear until you do not unlock the door. Turn the programme knob
back to OFF to turn the machine off. Select the desired programme to start the washing
machine. The alarm shall be deactivated.
F24 appears on the display
- The water level reaches the overflow level.
- Press the Start/Pause button to remove the warning and drain the water.
- Select and start the desired programme. If the error occurs again, disconnect the
appliance from the mains and contact the Cecotec Customer Service.
Error F04 to F98 appears on the display
- PCB electronic module failure.
- Turn the programme knob back to OFF to turn the machine off.
- Press the Start/Pause button after fixing the error. If the error occurs again, disconnect
the appliance from the mains and contact the Cecotec Customer Service.
Unb appears on the display
The unbalance error can be solved with the following methods.
1. Clothing entanglement.
Press and hold the Start/Pause button for 2 seconds to switch off the machine, open the
door, shake out the laundry and put it back into the machine, then select the spin programme
for re-drying.
2. Clothes too light.
BOLERO DRESSCODE 120700A
110