cecotec BOLERO DRESSCODE 120700 A Manual De Instrucciones página 91

- Wash cycle temperature.
- Degree and type of soiling.
Note:
Any whitish residue on dark fabrics is due to the insoluble compounds used in today's
phosphate-free powder detergents. If this occurs, shake or brush the fabric or use liquid
detergents. Use only specific detergents and additives for household washing machines.
When using descalers, dyes or bleaches for pre-washing, make sure that they are suitable for
use in domestic washing machines. Descalers may contain products that could damage your
washing machine. Do not use solvents in the washing machine (e.g. turpentine, benzine). Do
not wash fabrics that have been treated with solvents or flammable liquids.
Dosage
Follow the dosage recommendations of your detergent. The amount will depend on:
- Degree and type of soiling.
- Follow detergent manufacturer's instructions for a full load. Half load: 3/4 of the amount
used for a full load. Minimum load (approx. 1 kg): 1/2 of the amount used for a full load.
- Water hardness in your area. Soft water needs less detergent than hard water.
Note:
Too much detergent can lead to excessive foaming, which reduces the effectiveness of the
wash. If the machine detects too much foam, it can stop spinning.
Insufficient detergent can cause the laundry to turn grey over time and also calcify the
heating element, drum, and hoses.
Where to put detergent and additives
The detergent dispenser drawer has three compartments.
1. Prewash compartment
- Detergent for pre-washing/soaking
2. Washing compartment
- Detergent for main wash
- Water softener (water hardness class 4)
3. Softener compartment
- Softener:
Figure 22 (depending on models)
BOLERO DRESSCODE 120700A
ENGLISH
91