cecotec BOLERO DRESSCODE 120700 A Manual De Instrucciones página 85

- Keep packaging materials (plastic bags, polystyrene parts, etc.) out of the reach of
children, as they are potentially dangerous.
Box content
- Package of small items
Washing machine
-
Instruction manual
-
Bag of small items
-
Plastic protective caps (x4)
-
Spanner
-
- Cold water supply hose
- Bottom plate with acoustic foam (optional - depending on model)
3. INSTALLATION
- Move the washing machine without lifting it from the top. Install the washing machine on
a solid, level surface, preferably in a corner of the room.
- Make sure that the ventilation openings in the base of the washer (if present on your
model) are not obstructed by carpet or other material.
NOTE:
The washing machine is equipped with transport screws to prevent possible damage to
the interior during transport. Before using the washing machine, it is essential to remove
the transport screws. Once removed, cover the openings with the 4 plastic protective caps
supplied.
If the transport screws are not removed, they may damage the device.
Unscrew the 4 transport screws by approx. 30 mm in the direction of the arrow using
1.
the spanner provided. Fig.3
Push the 4 transport screws horizontally inwards and loosen them. Fig. 4
2.
3. Take the transport screws out together with the rubber part and the plastic part. Fig. 5
4. To ensure safety and reduce noise, you should install the supplied plastic protective
caps. Support and place the cap in the hole and press down until it "clicks". Fig. 6
Important: keep the transport screws and the spanner for future transport of the device and,
in this case, replace the transport screws in reverse order.
BOLERO DRESSCODE 120700A
ENGLISH
85