SCHEDULED MAINTENANCE TABLE
Procedure
Battery fluid level check
Side and main broom height check
Hopper hydraulic lifting system oil level check
Skirt height and operation check
Panel dust filter cleaning and integrity check
Filter shaker operation check
Driving wheel chain cleaning and tension check
Visual inspection of the belt between motor and main broom
Closed pocket filter cleaning and integrity check
Brake adjustment
Nut and screw tightening check
Steering chain cleaning
Vacuum system efficiency check
Replacement of the timing belt between idle gear and main broom
Hopper gasket integrity check
Lifted hopper control microswitch adjustment check
Horizontal hopper control microswitch adjustment check
Motor carbon brush check and replacement
Hydraulic system oil change
(*)
For the relevant procedure, see the Service Manual.
(1) Or before start-up.
(2) And after the first 8 running-in hours.
(3) Change the hydraulic system oil for the first time after 500 hours, then every 2,000 hours or every year.
Upon delivery
Terra™ 5200
1463545000(1)2008-07
USER MANUAL
Every
Every 10
Every 50
100
hours
hours
hours
(1)
(1)
(*)
(*)
(*)
(*)
(*)(2)
(*)
(*)
ENGLISH
Every
Every
200
400
hours
hours
(*)
(*)
(*)
(*)
(*)
(*)(3)
19