Specialized Allez Sport Manual Del Usuario página 14

7. 2 . I NSTA L LI NG T H E SEATPO ST
1
FIG. 1
„ Make sure the seatpost clamp bolt is facing toward the back of the bicycle.
„ Apply grease, then insert the seatpost into the seat tube.
„ Apply threadlocker to the seatpost clamp bolt, then use a 4 mm hex key to torque the bolt
to 6.2 Nm / 55 in-lbf.
7.3 . DE T ER MI NI NG S A DDL E HE I GH T
2
C
FIG. 2
MINIMUM INSERTION (A): To prevent damage to the frame and/or seatpost, it's
„
important to have a minimum amount of seatpost insertion in the seat tube. This minimum
insertion must meet the following requirements:
• The seatpost must be inserted into the frame deep enough so the minimum insertion/
maximum extension (min/max) mark (C) on the seatpost is not visible.
• The seatpost must be inserted into the seat tube deep enough to meet or exceed the
100 mm minimum measure insertion depth required by the frame.
A
B
12