Corghi ET88 Manual De Uso página 75

Truck / car function: modifies the general setup of the machine
depending on the type of wheel to be balanced (truck wheels or
car wheels).
Optimisation: activates the procedure for optimisation of the
rotating weights.
Position search: brings the wheel into the correct position for
application on both sides in alternation.
Manual data input: activates the procedure for manual input of
the wheels' dimensional values.
Spin counter: displays the total and partial count of the wheel
spins performed.
Visual check: this function is active with the guard open and
spins the
its roundness.
Sensor calibration: activates the program for calibrating the
measurements made with the distance sensor.
Sensitivity calibration: activates the program for calibrating the
imbalance measurements.
Service program: recalls the diagnostics program, useful for the
technical after-sales service.
Activate setup program selection: allows access, by displaying
them, to the icons relating to the programs for setting the
balancing machine's operating parameters.
Preferential program setting: activates the procedure for
setting of three preferential programs to be placed in the main
icon bar.
Modify wheel spin counter: program not available.
ET 88 operator's manual
wheel at low speed to allow a visual check on
GB
75