Corghi ET88 Manual De Uso página 94

The language of the machine messages that appear on the monitor can be
selected.
After obtaining the setting programs menu on the display, proceed as follows:
- select the
- the screen shows a list of flags, e.g.
(Italian);
- select the flag corresponding to the language required; in case of doubt, the
name of the language activated by the flag chosen can be seen in the bottom
right-hand corner of the screen ;
- press the
The only way to exit from this program is to select one of the listed languages, after
which the imbalance image page returns to the screen.
The icon allows a new group of language to be recalled to the screen.
This sets the unit of measurement (grams or ounces) and the rounding (x1gr, x5gr or
x10gr, x50gr) with which the imbalance values are displayed.
After the list of setting programs has been displayed, proceed as follows:
- select the
If the machine is preset for balancing truck wheels, the following group of icons will
appear:
Set grams x10; displays the imbalance values in steps of 10 grams.
Set grams x50; displays the imbalance values in steps of 50 grams.
Set half an ounce: displays the imbalance values in steps of half an
ounce.
Set ounces; displays the imbalance values in ounces.
94
Language
language setting icon;
key to activate the language.
Imbalance display in grams/ounces
Imbalance unit of measurement setting icon.
(English),
ET 88 operator's manual
(German),