Publicidad
SURFACE INSTALLATION AND ELECTRICAL WIRING (OPTIONAL)
7. Drive the #10 Screws [SS676] provided with the Surface Mount Kit (sold separately) into the holes in the side kit brackets. Use a
penny (as detailed in figure 4 below) to set the depth distance.
8. Orienting the sidekit as shown below, insert the Screw Heads into the keyholes on the side of the upper and lower Light Brackets.
Note: If the bracket is not oriented correctly, the side kit cannot be lowered into place and may fall resulting in damage.
Note: If the Sidekit feels loose, move the sidekit back and forth to determine which screw feels loose. Lift and remove the sidekit from
the brackets and rotate the loose screw a 1/4 turn clockwise, repeating as necessary.
Note: If the Sidekit does not lower into place, remove the sidekit from the keyholes and rotate the screws a 1/4 turn counterclockwise.
7
8
Front
Rear
toward
toward
user
wall
1/16" (1.52 mm)
or the thickness
of a penny.
SS676
© 2022 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
Part no. 209-1426 || 09-MAY-2023
13
800.877.2376
www.robern.com
Inline™ Tunable Light
Publicidad
