Publicidad
SWAY™ WALL CONTROL
This model requires the use of the Sway™ Wall Control (CB-SWAY sold separately).
In addition to the Sway™ Wall Control, a standard wall switch may also be used for on/off (non-dimming) operation.
More information provided on Page 10 and 11.
NOTE: The Sway™ Wall Control runs on low voltage (5VDC) sourced from the electrical enclosure using the CAT5 cable provided with
the lights.
It is not directly compatible with 120VAC.
Low voltage and dual voltage wiring switch enclosures are available.
Check with local code authority for compliance.
NOTE: Sway™ Wall Control and Electrical Enclosures are not compatible with any other product.
Do not connect Sway™ Wall Control or Sway™ Electrical Enclosures to any other products via CAT5 cable.
NOTE: Only one Sway™ Wall Control can be used per lighting array.
No more than 6 lights are recommended per array.
MODEL NUMBERS
Use the chart below to learn how to read your light model number. Consult the Robern Price Book for a complete list of model numbers.
Example Model:
M = Inline
Product Line
Category
L = Lighting
Dimensions
C30 = 3-1/2"W × 30"H
C36 = 3-1/2"W × 36"H
C40 = 3-1/2"W × 40"H
C48 = 3-1/2"W × 48"H
I = Inline
Lighting Style
Light Type
K = Title 24 Certified LED
Quantity of Lights
S = Single
S = Silver
Body Finish
Lighting Option
3D = Dimmable: Dimming to 5%, Warm White (3000K)
VC = Tunable: Dimming to 5%, Color Temperature Tuning
(2700K - 5600K)
© 2022 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
M
L
C30
I
M
L
2
K
S
S
I
K
S
S
3D
Part no. 209-1426 || 09-MAY-2023
Inline™ Tunable Light
Publicidad
