Publicidad
WIRING YOUR ELECTRICAL ENCLOSURE -
CONTROL WIRE CONNECTIONS
NOTE: Robern recommends Cat 5 cable runs between two electrical enclosures or an electrical enclosure and Sway™ Wall Control to
be no more than 25 feet each.
NOTE: Robern recommends no more than six (6) lights to be daisy chained together with one Sway™Wall Control.
NOTE: For the last electrical enclosure in the lighting array (furthest from the Sway™ Wall Control), toggle the switch to the "ON"
position.Set all other electrical enclosures to the "OFF" position.
FERRITE
CIRCUIT
BREAKER
120VAC
15A
© 2022 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
SWAY™ WALL CONTROL
CAT5
CABLE
AC POWER CONNECTION
AC POWER CONNECTION
(When wiring 2 or more lights)
Switch
CAT5 CABLE
(IF REQUIRED)
Sway™ ELECTRICAL
ENCLOSURE
Install provided ferrite on one end of cable as
shown.
9
CAT5 CABLE
(IF REQUIRED)
LIGHT FIXTURE /
ENCLOSURE
Sway™ ELECTRICAL
ENCLOSURE
WIRING EXAMPLE FOR A MULTIPLE LIGHT ARRAY
1" [25mm]
Part no. 209-1426 || 09-MAY-2023
Inline™ Tunable Light
TO NEXT
Publicidad
