Publicidad
PRODUCT ALIGNMENT
3. Adjust the cabinet doors until they align with the lights using the three-way adjustment features in the hinges, adjusted using a #2
Phillips Head screwdriver.
3A. Height: With the hinge slightly closed, you can access the middle screw. This screw will move your door front up and down.
3B. Side to Side/Depth: With the hinge fully extended, you can access the front and back screws. The front screw will adjust the door
from side to side and the rear screw will adjust the door's depth.
4. Press a # 10 screw cap [SS672], provided with each light, onto all exposed screw heads.
5. Press a hole plug [SS134], included with your cabinet hardware, into all open mounting holes.
3A
Surface Mount
SS134
© 2022 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
3B
Recess Mount
SS672
SS672
SS672
SS672
SS675
16
Part no. 209-1426 || 09-MAY-2023
Inline™ Tunable Light
Publicidad
