Publicidad
FINAL ASSEMBLY
1. Using the provided #8 screws [203-1538] attach an adjustable button receiver [211-1362] to each bracket. The screw head on the
button receiver must be facing down.
2. Connect the electrical connector from the light to the electrical low voltage wire connector coming out of the electrical enclosure.
3. Align and insert the buttons on the back of the light into the upper and lower adjustable button receivers [205-3304].
4. Slide the light down until it's completely engaged.
1a
205-3304
203-1538
1b
205-3304
203-1538
© 2022 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
2
3
Button
[211-1351]
Surface Mount
14
Recess Mount
Part no. 209-1426 || 09-MAY-2023
Inline™ Tunable Light
Publicidad
