To Thread Thread Upper Looper (Blue) - JUKI MO-80CB Manual De Instrucciones

(1) TO THREAD UPPER LOOPER
(BLUE)
Be sure to turn off power switch.
Thread the upper looper as indicated (1)~(8).
* Raise Presser foot to release tension discs.
* Pass thread from back to the front through the
thread guide (1).
* Thread the thread guide A (2) by pulling the thread
towards the left until it slips under guide.
Then pull thread along the path as illustrated.
* While holding thread with fingers, pass it between
the tension discs and pull thread down to make
certain it is properly located in between the
tension discs (3).
THREAD
2
3
3
4
5
37
8
7
5
6
2
3
1
2
3
4
1