To Thread Overedge Right Needle; Thread (Green) (B On Needle Clamp) - JUKI MO-80CB Manual De Instrucciones

(3) TO THREAD OVERLOCK RIGHT NEEDLE

THREAD (GREEN) (B ON NEEDLE CLAMP)

* Thread the right needle as indicated (1)~(9).
* Raise presser foot to release tension discs.
* Pass thread from back to the front through the
thread guide (1).
* Thread the thread guide A (2) by pulling the thread
towards the left until it slips under guide.
Then pull thread along the path as illustrated.
* While holding thread with finger, pass it between
the tension discs and pull thread down to make
certain it is properly located in between the
tension discs (3).
2
3
3
4
5
43
1
2
3
6
5
4
7
8
9
1
2
3