CYBEX gold SIRONA G i-Size Guia Del Usuario página 13

8. If you are using a seat with a SensorSafe Clip, push the clip closed until
you hear an audible "CLICK" and slide the closed clip down towards the
Belt buckle (21).
9. Tighten the Lap belts (23) and then pull on the Central adjustment belt
(24) to tighten the Shoulder belts (20) until they rest snug against your
child's body.
The harness should be fitted tight enough so that it is not possible to put a
��
fold in any of the straps.
10. When using the SensorSafe clip, position the clip directly below the
shoulder pads.
11. Rotate the seat to the preferred travel position. Forward facing direction
is only permitted for children exceeding an age of 15 months and a size
of 76 cm.
REMOVING AND REATTACHING THE SEAT COVER
The car seat cover consists of 4 parts. These are fastened to the car seat
at several places. Once unfastened, the individual parts of the cover can be
removed. To reattach the cover, follow the removal instructions in the reverse
order.
If purchased with the Newborn inlay (1), the foam must be removed before you
wash. There are openings in the fabric for this purpose.
�� The cover may only be washed at 30°C with a delicate wash program
otherwise it may result in discolouration of the cover fabric. Please wash
the cover separately from other laundry and do not dry it in the dryer or in
direct sunlight!
MANUFACTURER'S WARRANTY AND DISPOSAL REGULATION
CYBEX GmbH (Riedingerstr. 18, 95448 Bayreuth, Germany) gives you 3
years warranty on this product. The warranty is valid in the country where
this product was initially sold by a retailer to a customer. The contents of the
warranty and all essential information required for the assertion of the warranty
can be found on our homepage: go.cybex-online.com/manufacturer-
warranty-car-seats. If a warranty is shown in the article description, your legal
rights against us for defects remain unaffected.
Please observe the waste disposal regulations in your country.
EN
9