Publicidad
Idiomas disponibles
Idiomas disponibles
•
Never use abrasive products in the cavity. Never immerse the
appliance in water and make sure no water or damp penetrates the
appliance except the cavity.
Make sure no water comes on the oven doors when the latter are
still hot.
Cleaning Outer Housing
1.
Wipe clean with a damp sponge. Wipe dry.
2.
NEVER use steel wool, metal scouring pads or abrasive cleaners, as
they may damage the finish.
Replacing the inner lamp
A replacement bulb is available to you should the original stop working. If
this is the case, you can call customer service at the address listed in the
"WARRANTY" section to get a replacement bulb. Be sure to perform the
following steps carefully as they comprise of manipulating small glass parts.
1.
Unplug the appliance from the outlet and allow it to cool completely
to avoid electric shocks or burns.
2.
With a screwdriver, unscrew the screw holding the metal clamp against
the glass cover.
3.
Using a tool such as a flat-ended screwdriver, carefully remove the
glass to gain access to the lightbulb.
4.
Remove the lamp by shifting it upwards and ejecting the bi-pin end
from its place. To replace with new bulb, align the two pins with the
small holes in the original bulb base and plug back in, ensuring the new
lamp is securely in place.
5.
Place the glass cover back into a secure position, ensuring it fits neatly,
and screw the metal clamp back into its original position to prevent
glass cover from falling off.
Do not immerse the OVEN in water or any other liquid. Any other servicing
should be performed by an authorized service representative.
www.kalorik.com
19
AFO 52295 SS – 200605
Publicidad
