Publicidad
Idiomas disponibles
Idiomas disponibles
English
Owner´s manual
Always turn off the engine before refueling.
Do not run a hot engine - fuel can spill and cause a fire.
5. FUEL AND OIL
ATTENTION!
Before starting work, please:
- Check that all the screws on the machine are tight.
- Check that the air filter is clean.
- Check that the handles are secure.
- Prepare the accessories according to the type of work and make sure that they are
correctly mounted.
- Fill with fuel as follows.
The fuel requires ordinary unleaded petrol with a research octane rating of at least 91. Engine
lubrication is accomplished by adding premium two-stroke oil.
Use fresh, clean fuel. Water and contaminants in petrol damage the fuel system.
Refuel in a well ventilated area with the engine stopped. If the engine was in use directly before
refueling, let it cool down first. Never refuel the machine in a building where petrol vapors can
reach flames or sparks.
Petrol is highly flammable and explosive. When handling fuel, you can be burned or seriously
injured.
Turn off the engine and keep it away from heat, sparks and flames.
Just refuel outside.
Recommended mixing ratio
Jaso fc-fd 2T oil (if another 2T blending oil of another specification is used, the blending ratio
will be 25:1).
40:1
2.5%
25:1
4.0%
Mixing at a different ratio may damage the engine. Check that the mixture is correct.
ATTENTION!
Use care and caution when handling fuels and always follow the safety instructions.
1. The engine must be off
2. Thoroughly clean the area around the caps to prevent dirt from entering the fuel tank.
34
25 cc, or millilitres per 1 litre of fuel
40 cc, or millilitres per 1l of fuel
Publicidad
