STEINEL US 360 COM1 Manual De Instrucciones página 21

4. How it works / Basic function
The ultrasonic and DualTech
presence detectors from the
Control PRO range control
lighting as well as heating,
ventilation and air-conditioning
(COM 2 only), e.g. in offices,
schools, public buildings or at
home, in relation to ambient
Presence Control PRO
US 360 COM1
Single US COM1
DualTech COM1
Dual US COM1
1 switching output operating in
relation to light-level setting and
presence of persons.
Settings:
- Light-level setting
- Stay-ON time, pulse mode,
IQ mode
5. Detection zone
DualTech / US 360, mounting height 2.8 m
DualTech
PIR radial & presence detection
PIR tangential detection
US tangential & presence detection
US radial detection of substantial movements
US 360
US tangential & presence detection
US radial detection of substantial movements
light level and the presence of
persons.
The presence detector's
switching outputs and reach
are set at the potentiometers
and dip switches or by using
the optional remote control.
Presence Control PRO
US 360 COM2
Single US COM2
DualTech COM2
Dual US COM2
1 switching output as COM 1.
An additional 2nd switching out-
put for operating HVAC
(heating / ventilation / air-con-
ditioning) in relation to the pres-
ence of persons.
Settings:
- Stay-ON time
- Switch-ON delay
- Room surveillance
Single US / Dual US, mounting height 2.8 m
- 21 -
Presence Control has a low in-
trinsic power consumption.
Presence Control PRO
US 360 DIM
Single US DIM
DualTech DIM
Dual US DIM
1 switching output operating in
relation to light-level setting and
presence of persons.
Settings:
- Light-level setting
- Stay-ON time, IQ mode
- Orientation light
- Constant-lighting control
Single US
Dual US
GB