STEINEL US 360 COM1 Manual De Instrucciones página 25

DIM
DIP 5
Constant light ON / OFF
Provides a constant level of
brightness. Detector measures
the prevailing level of daylight
and activates sufficient artificial
light to achieve the required
level of brightness.
DualTech COM1 / COM2 / DIM
DIP 6 / 7 / 8
Trigger mode
The trigger mode enables the user to choose which sensing technologies should be used
to initially turn the load on and which technologies are required to keep it on. The following
settings are possible:
Both: Requires movement recognition by PIR and US
Either: Requires movement recognition by PIR or US
PIR: Requires movement recognition by PIR
US: Requires movement recognition by US
Inital occupancy:
Sensor technology used to turn the load on (PIR, US, Both, Either)
Maintain Occupancy:
Sensor technology used to keep the load on after initial occupancy (PIR, US, Both, Either)
The trigger mode is selected by DIP switches 6, 7 and 8.
TEST
MODE
MANUAL
1 2
on
NORMAL AUTO
MODE
As daylight changes, the
switched-in artificial lighting
component is adjusted accord-
ingly. In addition to the daylight
component, artificial light is also
switched ON and OFF in rela-
tion to whether or not persons
are present.
ON / OFF
CONST.
OFF
3 4 5 6
CONST. TRIGGER MODE
ON
ON
7 8
- 25 -
GB