Reiner 880 Manual De Instrucciones página 74

REINER 880
To confirm the input, push [OK].
f
To save the setting and return to the main menu,
f
push [RETURN] twice.
The main menu appears.
2.4. Numberer/Fixed Number
Setting options are available when an imprint is chosen that contains the corresponding
component. Otherwise, the message "At the moment not selectable" will appear. This
message also occurs when you do not switch to the main menu first after selecting an imprint
(see "Changing Imprint", page 70) .
2.4.1. Numberer to zero (Num. 1,2)
Selection of "Numberer to zero (Num. 1,2)" resets the numberers to 0.
Resetting the numberers to 0 does not affect the counter reading
(see "Counter", page 86).
Push [MENU].
f
"Imprint" appears.
Push [u] twice.
f
"Numberer/Fixed Number" appears
Push [SELECT].
f
"Numberer to zero (Num. 1,2)" appears.
Push [SELECT].
f
Set numberer to zero: Button OK" appears
Push [OK].
f
"Numberer = 0!" appears for approx. 2 seconds.
To return to the main menu,
f
push [RETURN] twice.
The main menu appears.
2.4.2. Numberer 1
The imprints 8 to 1 and 14 to 25 have an eight-digit numberer 1.
The imprints 33 to 39 have a six-digit numberer 1.
2.4.2.1. Changing Numberer 1
Set current status of the numberer 1.
Push [MENU].
f
"Imprint" appears.
Push [u] twice.
f
"Numberer/Fixed Number" appears
Push [SELECT].
f
"Numberer to zero (Num. 1,2)" appears.
74